User's Manual
OVERVIEW
The KS-3108 / KS-3116 8 ports/16 ports PS/2 / USB CAT5 UTP KVM (Keyboard, Video, Mouse) Switches are
control units that allow access and control of up to 8 (KS-3108) or 16 (KS-3116) computers from a single PS/2
/ USB keyboard, PS/2 / USB mouse, and monitor console.
There are two convenient methods to access any computer connected to the installation: (1) using the push
button port selection switches located on each unit’s front panel; (2) selecting from menus provided by the On
Screen Display (OSD).
Setup is fast and easy: simply plug cables into9 their appropriate ports. There is no software to configure, and
no incompatible problems. It works on multiple operating platform (PC compatible, Sun, etc.).
There is no better way to save time and money than with a KS-3108 / KS-3116 installation. Since a single
console manages all of the computers, the KS-3108 / KS-3116 setup: (1) eliminates the expense of having to
purchase a separate keyboard, monitor, and mouse for each computer; (2) saves all the space those extra
components would take up; (3) saves on energy costs; (4) eliminates the inconvenience and wasted effort
involved in constantly moving from one computer to another.
FEATURES
Control 8 (KS-3108) or 16 (KS-3116) computers with local or remote console.
Both the console and the computer are compatible with PS/2 / USB mouse and keyboard.
Computer selection via front panel switches and OSD.
LEDs display for easy status monitoring.
Auto Scan Mode for monitoring all computers.
Superior video quality.
Easy installation – no software required
Hot pluggable – add or remove computers for maintenance without powering down the switch
Support Windows, Solaris etc
HARDWARE REQUIREMENTS
CONSOLE
A VGA, SVGA monitor capable of the highest resolution that you will be using on any computer in the
installation.
A PS/2 / USB mouse
A PS/2 / USB keyboard
COMPUTER
The following equipment must be installed on each computer:
A VGA, SVGA card
Either USB port or PS/2 keyboard and mouse ports.