User's Manual

INSTALLATION

BEFORE YOU BEGIN

1. Make sure that power to all the devices you will be connecting up have been turned off.

2. To prevent damage to your installation, make sure that all devices on the installation are properly grounded.

SINGLE STAGE INSTALLATION

To set up your AS-3104DU/AS-3108DU/AS-3116DU installation, do the following:

1. Plug your USB/PS/2 keyboard, USB/PS/2 mouse and monitor into the console port section located on the

unit’s rear panel.

2. Using a KVM cable set, plug the custom SPDB connector into any available CPU port on the switch.

3. At the other end of the cable:

a) For a USB connection, plug the USB, video cables into their respective ports on the computer.

b) For a PS/2 connection, plug the keyboard, mouse, video cables into their respective ports on the computer.

4. Plug the power adapter cable into the switch’s power jack, then plug the power adapter into an AC power

source.

5. Repeat step 2-4 for any other computers you are connecting up.

This completes the single stage installation, and you can turn on the power to the computers.

NOTE: The AS-3104DU/AS-3108DU/AS-3116DU initially links to computer connected to the first CPU port.