User's Manual

ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
Page - 3 -of 6
Mechanical Drawing
IMPORTANT NOTE:
This module has been granted as Single modular approval.
8 P1_3 Digital I/O Port 1.3
9 P1_2 Digital I/O Port 1.2
10 P1_1 Digital I/O Port 1.1, 20mA drive capability
11 P1_0 Digital I/O Port 1.0, 20mA drive capability
12 P0_7 Digital I/O Port 0.7
13 GND Ground Pin Connect to GND
14 GND Ground Pin Connect to GND
15 P0_6 Digital I/O Port 0.6
16 P0_5 Digital I/O Port 0.5
17 P0_4 Digital I/O Port 0.4
18 P0_3 Digital I/O Port 0.3
19 P0_2 Digital I/O Port 0.2
20 P0_1 Digital I/O Port 0.1
21 P0_0 Digital I/O Port 0.0
22 RESET_N Digital Input Reset, active-low
23 VDD Power 2V to 3.6V main chip supply
24 VDD Power 2V to 3.6V main chip supply
15.0
31..5
1.0
3.0
Unit：mm
Tolerance：±0.2mm