Quick Installation Manual
Table Of Contents
5 / 12
2) Confirm by Configuration Mode
a) Wiring：
Serial port (check in device Manager after connecting PC with USB to serial port
line) :
VT310 devices connect serial ports (cables R232-Tx1, RS232-Rx1, GND connect
USB to 232 serial ports) :
b) Open the serial port to enter the Configuration Mode：
Use “SSCOM42”, click open serial port, enter +++ in the character box, and then click
Send.
notice：
①The serial port number corresponding to VT310 should be selected; Baud rate: