User's Manual

61
Enter:
telnet 192.168.2.2
telnet logs in 192. 168. 2. 2
5. 3 Traceroute
[Command] Traceroute <hostname> [maxhops <n>] [timeout <n>]
[Function] Test the acting routing of appointed mainframe.
[View] All views
[Parameter]
<hostname> tests the address or domain name of mainframe.
maxhops <n> tests the maximum routing jumps
timeout <n> timeout of each jumping testing (sec)
[Example]
Enter:
traceroute www.g.cn
Apply the routing of www. g. cn and display the testing results.
6 Configuration Command
In super user view, router can use configure command to switch it over configure view for
management.
Some setting command can support no and default, wherein, no indicates the setting of
canceling some parameter and default indicates the recovery of default setting of some
parameter.
6. 1 Configure
[Command] Configure terminal
[Function] Switchover to configuration view and input the equipment at the terminal end.
[View] Super user view
[Parameter] No
[Example]
Enter in super user view:
configure terminal
Switchover to configuration view.
6. 2 Hostname
[Command] Hostname [<hostname>]
default hostname
[Function] Display or set the mainframe name of router.
[View] Configure view.
[Parameter]
<hostname> new mainframe name