User's Manual

20
Scan
Click “Scan” to scan the available AP nearby
Auth Mode
Open type, shared type, WPA-PSK, WPA2-PSK
Open type
Encryption
Method
Support NONE, WEP
None
3.2.7 WLAN Client (STA Mode)
When working in STA mode, the router can access the Internet by connecting to the device as
access point.
Click the “Network>>WLAN Client” menu in the navigation tree to enter the “WLAN” interface.
Select “Client” for the interface type and configure relevant parameters. (At this moment, the
dialing interface in the "Network>>Dialing Interface" should be closed.)
The scanning function of the SSID is enabled only when Client is selected as WLAN interface. In
the “SSID scanning” interface, all available SSID names as well as the connection status of the
device as Client will be displayed.
Table 3-2-7 Parameters of WLAN Client
WLAN Client
Function description: Support Wi-Fi function and access to wireless LAN as client.
Parameters
Description
Default
Mode
Support many modes including
802.11b/g/n
802.11b/g/n
SSID
Name of the SSID to be connected
inhand
Authentication method
Keep consistent with the access point to
be connected
Open type
Encryption
Keep consistent with the access point to
be connected
NONE
3.2.8 DNS
DNA (Domain Name System) is a DDB used in TCP/IP application programs, providing switch
between domain name and IP address. Through DNS, user could directly use some meaningful
domain name which could be memorized easily and DNS Server in network could resolve the
domain name into correct IP address. The device makes analysis on dynamic domain name via
DNS.
Manually set the DNS, use DNS via dialing if it is empty. Generally, it needs to set only when static