User's Manual

19
IP Address
Set additional IP address of LAN
N/A
Subnet mask
Set subnet mask
N/A
Description
For recording significance of additional
IP address (not support Chinese
characters)
N/A
3.2.5 Switch of WLAN Mode
WLAN refers to Wireless Local Area Network. WLAN has two types of interfaces, the Access point
and the Client.
Click the “Network>>Switch of WLAN Mode” menu in the navigation tree to switch WLAN mode.
3.2.6 WLAN Client (AP Mode)
When working in AP mode, the device WLAN will provide network access point for other wireless
network devices so that they will have normal network communication.
Click the “Network>>WLAN” menu in the navigation tree to enter the “WLAN" interface.
Table 3-2-6 Parameters of WLAN Access Port
WLAN
Function description: Support WiFi function and provide wireless LAN access on site and
identity authentication of wireless user.
Parameters
Description
Default
SSID broadcast
After turning on, use can search the WLAN via SSID name
Enable
Mode
Six type for options: 802. 11g/n, 802. 11g, 802. 11n, 802.
11b, 802. 11b/g , 802. 11b/g/n
802.11b/g/n
Channel
Select the channel
11
SSID
SSID name defined by user
inhand
Authentication
method
Support open type, shared type, auto selection of WEP,
WPA-PSK, WPA, WPA2-PSK, WPA2, WPA/WPA2,
WPAPSK/WPA2PSK
Open type
Encryption
Support NONE, WEP
NONE
Wireless
bandwidth
Both 20MHz and 40MHz for selection
20MHz
Enable WDS
Click to enable WDS
Disable
Default Route
Click to enable Route
Disable
Bridged SSID
Set bridged SSID
None
Bridged BSSID
Set bridged BSSID
None