User's Manual

18
ICMP Detection Server
Set ICMP detection server
N/A
ICMP Detection Interval
Set ICMP Detection Interval
10 s
ICMP Detection Timeout
Set ICMP detection timeout
3 s
ICMP Detection Retries
Set ICMP detection max. retries
3
Backup Link
Optional dialup/cellular or WAN
Dialup/Cellular
Connection
Backup mode
Optional hot or cold backup
Hot backup
Table 3-2-3-2 Parameters of Link Backup - Backup Mode
Link Backup - Backup Mode
Function description: Select the way of link backup.
Parameters
Description
Hot Backup
Main link and backup Link keep online at the same time.
Cold Backup
Backup line will only be online when the main link is disconnected.
3.2.4 LAN
LAN provides configuration and modification of the parameters related to LAN for the device.
Here MAC address, IP address and other basic information can be modified and multiple IP access
to LAN is supported.
Click the “Network>>LAN” menu in the navigation tree to enter the configuration interface.
Table3-2-4 Parameters of LAN
2 LAN
Function description: LAN is the gateway address of the router.
Parameters
Description
Default
Type
Select from Static IP, DHCP
Static IP
MAC Address
MAC Address of the device LAN
00:18:05:08:15:77 (provided by
InHand Networks), provided for
device manufacturer
IP Address
Set IP address of LAN
192.168.2.1 (New IP address of
LAN needs to be entered after
modification to enter the
configuration page)
Subnet mask
Set subnet mask of LAN
255. 255. 255. 0
MTU
Max. transmission unit, optional
default/manual configuration
default (1500)
LAN Mode
Select transmit rate: Optional Auto
Negotiation/100M Full Duplex/100M
Half Duplex/10M Full Duplex/10M
Half-Duplex
Auto Negotiation
Multiple IP support (at most 8 additional IP addresses can be set)