User's Manual

14
Telecom)
Network Type
Auto, 2G Only, 3G Only, 4G Only
Auto
Connection Mode
Optional always online, dial on demand,
manual dialing
Always Online
Redial Interval
Set the redialing time when login fails.
30 s
Show Advanced Options
Initial Commands
Set initial commands
AT
PIN Code
For setting PIN code
N/A
MTU
Set max. transmission unit
1500
Authentication method
Optional: Auto, PAP, CHAP
Auto
Use Peer DNS
Click to receive peer DNS assigned by the
mobile carrier
Enable
Link detection interval
Set link detection interval
55 s
Debug
Enable debug mode
Disable
Debug Modem
Enable debug modem
Disable
ICMP Detection Mode
Ignore Traffic/ Monitor Traffic
Ignore Traffic
ICMP Detection Server
Set the ICMP Detection Server. N/A
represents not to enable ICMP detection.
N/A
ICMP Detection Interval
Set ICMP Detection Interval
30 s
ICMP Detection
Timeout
Set ICMP Detection Timeout (the detection
server will reboot if ICMP times out)
20 s
ICMP Detection Retries
Set the max. number of retries if ICMP fails
(redial if reaching max. times)
5
Dual SIM Enable
SIM2 Network Provider
(ISP)
Select current carrier
Custom
SIM2 Access Number
Please consult local carrier
SIM2 Username
Please consult local carrier
SIM2 Password
Please consult local carrier
SIM2 PIN Code
Set PIN code
SIM2 Authentication
Type
Select from: Auto, PAP, CHAP
Main SIM
Select from: SIM1, SIM2
Max Number of Dial
Number of redial after disconnect
5
CSQ Threshold
Set CSQ threshold (the router will switch to
another SIM if signal is below threshold).
0 (0: disabled)
Min Connected Time
Set min connected time (the router will
switch to another SIM if it’s more than min
time).
0 (0: disabled)
Table3-2-1-2 Parameters of Dialup/Cellular - Schedule
Administration of dialup/Cellular - Schedule
Function description: Online or offline based on the specified time.
Parameters
Description
Default