User's Manual

8
3.1.4 Admin Access
Admin services include HTTP, HTTPS, TELNET, SSHD and console.
HTTP
HTTP (Hypertext Transfer Protocol) is used for transferring web pages on Internet. After enabling
HTTP service on device, users can log on via HTTP and access and control the device using a web
browser.
HTTPS
HTTPS (Secure Hypertext Transfer Protocol) is the secure version of hypertext transfer protocol.
As a HTTP protocol which supports SSL protocol, it is more secure.
TELNET
Telnet protocol provides telnet and virtual terminal functions through a network. Depending on
Server/Client, Telnet Client could send request to Telnet server which provides Telnet services.
The device supports Telnet Client and Telnet Server.
SSHD
SSH protocol provides security for remote login sessions and other network services. The SSHD
service uses the SSH protocol, which has higher security than Telnet.
Console
The console port, also called the access or serial port, refers for initial configuration and
subsequent management of a device. It has the same terminal as the telnet client.
From the navigation tree, select System >> Admin Access, then enter “Admin Access” page.
Table3-1-4 Parameters of Admin Access
Admin Access
Function description:
1. Modify username and password of router.
2. The router may be set by the following 5 ways, i.e. http, https, telnet, SSHD and console.
3. Set login timeout.
Parameters
Description
Default
Username/Password
Username
Set name of user who logs in WEB configuration
adm
Old
Password
Previous password access to WEB configuration
123456
New
New password access to WEB configuration
N/A