User's Manual

7
as to provide multiple applications based on synced time.
From the navigation tree, select System >> Time, then enter the “Time” webpage, as shown
below. Click <Sync Time> to synchronize the time of the gateway with the system time of the
host.
Table 3-1-2 Parameters of System Time
System Time
Function description: Set local time zone and automatic updating time of NTP.
Parameters
Description
Default
Time of
Router
Display present time of router
8:00:00 AM, 12/12/2015
PC Time
Display present time of PC
Present time
Time zone
Set time zone of router
Custom
Custom TZ
String
Set TZ string of router
CST-8
Auto update
Time
Select whether to automatically update time,
you may select when startup or very
1/2/...hours.
Disable
3.1.3 Serial Port
Setting the parameters of router’s serial port according to the serial port of the terminal device
connected with router to achieve the normal communication between router and terminal
device.
From the navigation tree, select System >> Serial Port, then enter “Serial Port” page.
Table 3-1-3 Serial Port Setting Parameter Description
Serial Port
Function description: Set relevant parameters based on application of the serial port.
Parameters
Description
Default
Baud Rate
Serial baud rate
115200
Data Bit
Serial data bits
8
Parity
Set parity bit of serial data
None
Stop Bit
Set stop bit of serial data
1
Software
Flow
Control
Set whether to enable software flow control and enable software
flow control
Disable