User's Manual

30
Security Name
Fill in the community name for SNMPv1 or SNMPv2c, and fill in
the user name for SNMPv3. The length is 1 to 32 characters.
None
UDP Port
Fill in the UDP port number, ranging from 1 to 65535.
162
3.3.8 I/O
Click “Service >> I/O” in the navigation menu to check and configure I/O and relay of the device.
Table 3-3-8 I/O Parameters
I/O
Function description: Configuration I/O mode and relay of the device.
Parameters
Description
Default
I/O mode
Set I/O mode, input or output
Output
Relay configuration
Relay Default
status
Configure relay status
ON
Input triggered
report
Report when relay triggers in some situation
Disable
Trigger edge
Set trigger edge of the relay
Falling
edge
3.3.9 SMS
SMS permits message-based reboot and manual dialing. Configure Permit to Phone Number and
click <Apply and Save>. After that you can send “reboot” command to restart the device or send
custom connection or disconnection command to redial or disconnect the device.
From navigation tree, select "Service>>SMS" menu, then enter “SMS” page.
Table 3-3-9 SMS Parameters
Short message
Function description: Configuration SMS function to manage the router in the form of SMS.
Parameters
Description
Default
Enable
Click to enable backup DTU function
Disable
Status Query
Users define the English query instruction to inquire current
working status of the router.
N/A
Reboot
Users define the English query instruction to reboot the router.
N/A
SMS Access Control
Default Policy
Select the manner of access processing.
Accept
Phone Number
Fill in accessible mobile number
N/A