User's Manual

17
Parameters of Advanced Options
Service Name
Set service name
N/A
Set length of transmit queue.
Set length of transmit queue.
3
Enable IP header
compression
Click to enable IP header compression
Disable
Use Peer DNS
Click to enable use peer DNS
Enable
Link detection interval
Set link detection interval
55 s
Link detection Max. Retries
Set link detection max. retries
10
Enable Debug
Click to enable debug
Disable
Expert Option
Set expert options
N/A
ICMP Detection Server
Set ICMP detection server
N/A
ICMP Detection Interval
Set ICMP Detection Interval
30 s
ICMP Detection Timeout
Set ICMP detection timeout
20 s
ICMP Detection Retries
Set ICMP detection max. retries
3
3.2.3 VLAN
A virtual LAN (VLAN) comprises a group of logical devices and users. These devices and users
are not limited by physical locations, but can be organized base on functions, departments,
applications, and other factors. They communicate with each other as if they are in the same
network segment, which contributes to the name of VLAN.
Click “Network >> VLAN” to configure VLAN in router.
Table 3-2-3 VLAN Parameters
VLAN
Function description: Set VLAN parameters for LAN port.
Parameters
Description
Default
VLAN ID
Set VLAN ID
1
LAN1~LAN4
Set which LAN port to be a part of
VLAN
LAN1~LAN4 enabled
Primary
IP/Netmask
Set VLAN’s IP and netmask
192.168.2.1/255.255.255.0
Port mode
MAC
Device’s MAC address
Hardware MAC address
Enable
Able to configure Trunk mode after
enable
Enable
Speed Duplex
Set speed and duplex of LAN port
Auto Negotiation
Mode
Set LAN mode, Access or Trunk
Access
Native LAN
Traffic will not have VLAN tag if it is
1