User's Manual

14
represents not to enable ICMP detection.
ICMP Detection
Interval
Set ICMP Detection Interval
30 s
ICMP Detection
Timeout
Set ICMP Detection Timeout (the detection
server will reboot if ICMP times out)
20 s
ICMP Detection Retries
Set the max. number of retries if ICMP fails
(redial if reaching max. times)
5
Dual SIM Enable
SIM2 Network
Provider (ISP)
Select current carrier
Custom
SIM2 Access Number
Please consult local carrier
Empty
SIM2 Username
Please consult local carrier
Empty
SIM2 Password
Please consult local carrier
Empty
SIM2 PIN Code
Set PIN code
Empty
SIM2 Authentication
Type
Select from: Auto, PAP, CHAP
Empty
Main SIM
Select from: SIM1, SIM2
Empty
Max Number of Dial
Number of redial after disconnect
5
CSQ Threshold
Set CSQ threshold (the router will switch to
another SIM if signal is below threshold).
0 (0: disabled)
Min Connected Time
Set min connected time (the router will switch
to another SIM if it’s more than min time).
0 (0: disabled)
able3-2-1-2 Parameters of Dialup/Cellular - Schedule
Administration of dialup/Cellular - Schedule
Function description: Online or offline based on the specified time.
Parameters
Description
Default
Name of Schedule
schedule 1
schedule1
Sunday ~ Saturday
Click to enable
Time Range 1
Set time range 1
9:00-12:00
Time Range 2
Set time range 2
14::00-18:00
Time Range 3
Set time range 3
0:00-0:00
Description
Set description content
N/A
3.2.2 WAN
Click the “Network>>WA N” to set WAN port.
WAN supports three types of wired access including static IP, dynamic address (DHCP) and
ADSL (PPPoE) dialing.