User's Manual

49
Enable NAT Click to enable NAT Enable
Enable LZO Click to enable LZO compression Enable
Encryption Algorithms
Blowfish(128)/DES(128)/3DES(192)/AES(12
8)
/AES(192)/AES(256)
Blowfish(128)
MTU Set max. transmission unit 1500
Max. Fragment Size Set max. fragment size N/A
Debug Level Error/warning/information/debug Warning
Interface Type TUN/TAP TUN
Expert Option (not
recommended)
Set expert option, not recommended N/A
3.6.7 OpenVPN Advanced
From navigation tree, select "VPN>>OpenVPN Advanced" and enter "OpenVPN Advanced"
interface.
Table 3-6-7 Configuration Parameters of OpenVPN Advanced
OpenVPN Advanced
Function description: Configure parameters of OpenVPN Advanced.
Parameters Description Default
Enable Client-to-Client
(Server Mode Only)
Click to enable Disable
Client Management
Enable Click to enable client management Enable
Tunnel Name Set tunnel name
OpenVPN_T_
1
Username/CommonName Set username/commonname N/A
Password Set client password N/A
Client IP (4th byte must be
4n+1)
Set client IP address N/A
Local Static Route Set local static route N/A
Remote Static Route Set remote static route N/A
3.6.8 Certificate Management
From navigation tree, select VPN >> Certificate Management, then enter “Certificate
Management” page.