User's Manual

47
Enable Debug Enable debug mode. Disable
Expert Option (not
recommended)
Set expert option, not recommended N/A
3.6.5 PPTP Client
From navigation tree, select VPN>>PPTP Client, enter "PPTP Client" and click <add>.
Table 3-6-5 Parameters of PPTP Client
4 PPTP Client
Function description: Configure parameters of PPTP client.
Parameters Description Default
Enable Click to enable PPTP client Disable
Tunnel Name User defines tunnel name
PPTP_tun
nel_1
PPTP Server Set PPTP Server address N/A
Username Set username of PPTP server N/A
Password Set password of PPTP server N/A
Startup Modes
Select Auto Activated/Triggered by
Data/Passive/Manually Activated
Auto
Activated
Authentication method Select Auto/CHAP/PAP/MS-CHAPv1/MS-CHAPv2 Auto
Local IP Address Set local IP address N/A
Remote IP Address Set remote IP address N/A
Remote Subnet Set remote subnet address N/A
Remote Netmask Set remote subnet mask
255. 255.
255. 0
Link Detection Interval Set link detection interval 60 s
Max. Retries for Link
Detection
Set the max. number of retries 5
Enable NAT Click to enable NAT Disable
Enable MPPE Click to enable MPPE Disable
Enable MPPC Click to enable MPPC Disable
MTU Set max. transmission unit 1500
MRU Set max. receiving unit 1500
Enable Debug Enable debug mode. Disable
Set expert
option (not
recommended)
Set expert option, not recommended N/A