User's Manual

31
write data on agents. This parameter must be set
the same on both agents and NMS.
Access Limit Access limit includes the MIB objects that can be
read only or read/written by the NMS.
Read-Only
MIB View Select the MIB objects that can be monitored and
managed by the NMS. Only the default view is
supported currently.
defaultView
Table 3-3-6-2 SNMPv3 Parameters
Parameters Description Default
User Group Management
Groupname
User-
defined user group name. The length is 1 to 32
characters.
None
Security
Level
Select a security level for the group. The values include
NoAuth/NoPriv, Auth/NoPriv, and Auth/Priv.
NoAuth/NoPriv
Read-only
View
Select the SNMP read-
only view. Only the default view is
supported currently.
defaultView
Read-write
View
Select the SNMP read-write view. Only the default view is
supported currently.
defaultView
Inform
View
Select the SNMP inform view. Only the default view is
supported currently.
defaultView
Usm Management
Username User-defined user name. The length is 1 to 32 characters. None
Groupname
The group to which a user is added must have been
configured in the user group management table.
None
Authenticati
on
Select an auth
entication mode. Three authentication modes
are available: MD5, SHA, and None. If you select None,
authentication is disabled.
None
Authenticati
on
Password
This parameter is available only when the authentication
mode is not None.
The length is 8 to 32 characters.
None
Encryption
Select the encryption mode. The values are None, AES, and
DES.
None
Encryption
Password
This parameter is available only when the authentication
mode is not None.
The length is 8 to 32 characters.
None