User's Manual

29
Table 3-3-5 Device remote management platform
Device Manager - Only SMS
Function description: Configuration of device manager functions can connect the router to the
platform
Parameters Description Default
Enable Enable platform Disable
Service Type
Platform work mode:
Device Manager
Device Manager
InConnect Service
Custom
Server Input address of server Ics.inhand.com.cn
Secure Channel Enable Secure Channel Enable
3.3.6 SNMP
Network devices are usually sparsely-located on a network. It is time-consuming for the
administrator to configure and manage these network devices on site. In addition, if these devices
are from different vendors, each of which provides a suite of independent management interfaces
(for example, different command line interfaces), the workload of configuring the devices in
batches is huge. In this situation, traditional manual configuration method has the deficiencies of
high cost and low efficiency. The network administrator can use the Simple Network Management
Protocol (SNMP) to remotely configure and manage the devices and perform real-time monitoring
on them.
Figure 3-3-6 SNMP Topology