User's Manual

24
3.2.10 Static Route
Static route needs to be set manually, after which packets will be transferred to appointed routes.
To set static route, click the "Network >> Static Route" menu in the navigation tree, then enter
“Static Route” interface.
Table 3-2-10 Static Route Parameters
Static Route
Function description: Add/delete additional static rote of router. Generally, it's unnecessary
for users to set it.
Parameters Description Default
Destination
Address
Set IP address of the destination N/A
Subnet Mask Set subnet mask of the destination
255. 255.
255. 0
Gateway Set the gateway of the destination N/A
Interface Select LAN/CELLULAR/WAN/WAN(STA) N/A
Description
For recording significance of static route address (not
support Chinese characters)
N/A
3.3 SERVICE
Service settings include DHCP service, DNS, DNS relay, Dynamic domain name, Device remote
management platform, SNMP, SNMP Trap, SMS, Traffic Manager, Alarm Settings
3.3.1 DHCP service
DHCP adopts Client/Server communication mode. Client sends configuration request to Server
which feeds back corresponding configuration information, including distributed IP address to the
Client to achieve the dynamic configuration of IP address and other information.
 The duty of DHCP Server is to distribute IP address when Workstation logs on and ensure
each workstation is supplied with different IP address. DHCP Server has simplified some
network management tasks requiring manual operations before to the largest extent.
 As DHCP Client, the device receives the IP address distributed by DHCP server after logging