User's Manual

19
Table
3-2-4 Parameters of LAN
2 LAN
Function description: LAN is the gateway address of the router.
Parameters Description Default
Type Select from Static IP, DHCP Static IP
MAC Address MAC Address of the device LAN 00:18:05:08:15:77 (provided by
InHand Networks), provided
for device manufacturer
IP Address Set IP address of LAN 192.168.2.1 (New IP address of
LAN needs to be entered after
modification to enter the
configuration page)
Subnet mask Set subnet mask of LAN 255. 255. 255. 0
MTU
Max. transmission unit, optional
default/manual configuration
default (1500)
LAN Mode
Select transmit rate: Optional Auto
Negotiation/100M Full Duplex/100M
Half Duplex/10M Full Duplex/10M
Half-Duplex
Auto Negotiation
Multiple IP support (at most 8 additional IP addresses can be set)
IP Address Set additional IP address of LAN N/A
Subnet mask Set subnet mask N/A
Description
For recording significance of
additional IP address (not support
Chinese characters)
N/A
3.2.5 WLAN Client (AP Mode)
When working in AP mode, the device WLAN will provide network access point for other
wireless network devices so that they will have normal network communication.
Click the “Network>>WLAN” menu in the navigation tree to enter the “WLAN" interface.