User's Manual

16
Table 3-2-2-1 Static IP Parameters of WAN
WAN - Static IP
Function description: Access to Internet via wired lines with fixed IP.
Parameters Description Default
Shared connection (NAT)
Enable—
Local device connected to
Router can access to the Internet via
Router.
Disable—
Local device connected to
Router cannot access to the Internet via
Router.
Enable
Default route Enable default route Enable
MAC Address MAC Address of the device
00:18:05:08:07:3D
(provided by
InHand Networks),
provided for device
manufacturer
IP Address Set IP address of WAN 192.168.1.29
Subnet mask Set subnet mask of WAN
255. 255.
255.
0
Gateway Set gateway of WAN 192. 168. 1. 1
MTU
Max. transmission unit, default/manual
settings
default (1500)
Multiple IP support (at most 8 additional IP addresses can be set)
IP Address Set additional IP address of LAN N/A
Subnet mask Set subnet mask N/A
Description
For recording significance of additional
IP address
N/A