User's Manual

15
Table 3-2-1-2 Parameters of Dialup/Cellular - Schedule
Administration of dialup/Cellular - Schedule
Function description: Online or offline based on the specified time.
Parameters Description Default
Name of Schedule schedule 1 schedule1
Sunday ~ Saturday Click to enable
Time Range 1 Set time range 1 9:00-12:00
Time Range 2 Set time range 2 14::00-18:00
Time Range 3 Set time range 3 0:00-0:00
Description Set description content N/A
3.2.2 WAN/LAN Switch
WAN/LAN1 Port supports two types of work mode, include WAN and LAN.
Click the “Network>>WAN/LAN Switch” to set work mode
WAN supports three types of wired access including static IP, dynamic address (DHCP) and
ADSL (PPPoE) dialing.
DHCP adopts Client/Server communication mode. Client sends configuration request to Server
which feeds back corresponding configuration information, including distributed IP address to the
Client to achieve the dynamic configuration of IP address and other information.
PPPoE is a point-to-point protocol over Ethernet. User has to install a PPPoE Client on the basis
of original connection way. Through PPPoE, remote access devices could achieve the control and
charging of each accessed user.
WAN of the device is disabled by default.
Click the “Network>>WAN” menu in the navigation tree to enter the “WAN" Interface.