User's Manual

14
Network Type Auto, 3G Only, 4G Only Auto
Connection Mode
Optional always
online, dial on demand,
manual dialing
Always Online
Redial Interval Set the redialing time when login fails. 30 s
Show Advanced Options
Initial Commands Set initial commands AT
PIN Code For setting PIN code N/A
MTU Set max. transmission unit 1500
Authentication method Optional: Auto, PAP, CHAP Auto
Use Peer DNS
Click to receive peer DNS assigned by the
mobile carrier
Enable
Link detection interval Set link detection interval 55 s
Debug Enable debug mode Disable
Debug Modem Enable debug modem Disable
ICMP Detection Mode Ignore Traffic/ Monitor Traffic Ignore Traffic
ICMP Detection Server
Set the ICMP Detection Server. N/A
represents not to enable ICMP detection.
N/A
ICMP Detection
Interval
Set ICMP Detection Interval 30 s
ICMP Detection
Timeout
Set ICMP Detection Timeout (the detection
server will reboot if ICMP times out)
20 s
ICMP Detection Retries
Set the max. number of retries if ICMP fails
(redial if reaching max. times)
5
Dual SIM Enable
SIM2 Network
Provider (ISP)
Select current carrier Custom
SIM2 Access Number Please consult local carrier Empty
SIM2 Username Please consult local carrier Empty
SIM2 Password Please consult local carrier Empty
SIM2 PIN Code Set PIN code Empty
SIM2 Authentication
Type
Select from: Auto, PAP, CHAP Empty
Main SIM Select from: SIM1, SIM2 Empty
Max Number of Dial Number of redial after disconnect 5
CSQ Threshold
Set CSQ threshold (the router will switch to
another SIM if signal is below threshold).
0 (0: disabled)
Min Connected Time
Set min connected time (the router will switch
to another SIM if it’s more than min time).
0 (0: disabled)