User's Manual

13
3.2 NETWORK
Network settings include Cellular, WAN/LAN, WAN (STA), LAN, Switch WLAN Mode,
WLAN Client, Link Backup, VRRP, IP Passthrough and Static Routes.
3.2.1 CELLULAR
Insert SIM card and dial to achieve the wireless network connection function of router.
Click the “Network>>Dial Interface” menu in the navigation tree to enter the “Dial Interface”.
Table
3-2-1-1 Parameters of Dialup/Cellular
Dialup/Cellular Connection
Function description: Configure parameters of PPP dialup. Generally, users only need to set
basic configuration instead of advanced options.
Parameters Description Default
Enable Enable PPP dialup. Enable
Time Schedule Set time schedule ALL
Shared connection
(NAT)
Enable—
Local device connected to Router
can access to the Internet via Router.
Disable—
Local device connected to Router
cannot access to the Internet via Router.
Enable
Default Route Enable default route Enable
Network Provider (ISP)
For selecting network provider providing
service at present
Custom
APN (inapplicable to
CDMA2000 series)
Mobile carrier provides relevant parameters
(subject to local carrier)
cmnet/uninet
Dialing Number
Relevan
t dialing parameters provided be
mobile carriers (subject to local carrier)
“*99#”“*99***1#”
(China Mobile,
China
Unicom)#777(Chin
a Telecom)
Username
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs” (China
Mobile, China
Unicom)
CARD(China
Telecom)
Password
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs” (China
Mobile, China
Unicom)
CARD(China
Telecom)