User's Manual

9
The console port, also called the access or serial port, refers for initial configuration and
subsequent management of a device. It has the same terminal as the telnet client.
From the navigation tree, select System >> Admin Access, then enter “Admin Access” page.
Table
3-1-3 Parameters of Admin Access
Admin Access
Function description:
1. Modify username and password of router.
2. The router may be set by the following 5 ways, i.e. http, https, telnet, SSHD and console.
3. Set login timeout.
Parameters Description Default
Username/Password
Username Set name of user who logs in WEB configuration adm
Old
Password
Previous password access to WEB configuration 123456
New
Password
New password access to WEB configuration N/A
Confirm
New
Password
Reconfirm the new password N/A
Amin functions
Service Port Service port of HTTP/HTTPS/TELNET/SSHD/Console 80/443/23/22
Local
Access
Enable - Allow local LAN to administrate the router with
corresponding service (e.g. HTTP)
Disable - Local LAN cannot administrate the router with
corresponding service (e.g. HTTP)
Enable
Remote
Access
Enable - Allow remote host to administrate the router
with corresponding service (e.g. HTTP)
Disable - Remote host cannot administrate the router with
corresponding service (e.g. HTTP)
Enable
Allowed
Access from
WAN
(Optional)
Set allowed a
ccess from WAN (only
HTTP/HTTPS/TELNET/SSHD)
The host
controlling
service at this
moment can be
set, e.g.
192.168.2.1/30
or
192.1682.1-192.1
682.10
Description
For recording significance of various parameters of
admin functions (without influencing router
configuration)
N/A