User's Manual

27
Figure 5-8 TCP Example 3
5.3 Transparent UDP
5.3.1 Parameter Settings
Select UDP for the “Application center link mode”, the other configuration are same
with section 5.2.1 Parameter Settings.
5.3.2 Demonstration
UDP is a connectionless transmission protocol. To enable the device to successfully
connect to the server, configure the login packet and heartbeat packet.
Step 1: See chapter 5.3.1 Parameter Settings.
Step 2: Configure login packet. Choose “Configuration>>User defined packets >
Log-in”. Select the packet type and enter the packet body, as shown in Figure 5-9.