User's Manual

18
4.9 Administrator Account
Table 4-8 Setting administrator login parameters
Parameters
Description
Default
Administrator
Set the administrator account name.
adm
Administrator
password
Set the password for the administrator account.
123456
Common user
Set the name of the common user.
adm
Common user
password
Set the password for the common user.
123456
4.10 ICMP
Table 4-9 Setting ICMP parameters
Parameters
Description
Default
RRC link Miantance
Maintain the link between the communication module and
the base station
Close
Detect interval when
network broken
Range 10~120 seconds, only for dual-SIM DTU.
If there is no communication data flow at this time interval,
ICMP detection will start.
10
ICMP host
The destination IP address for ICMP
If the IP is empty, the application center IP will be detected
by ICMP.
0.0.0.0
Max lost packets
If the times of consecutive ICMP failure reaches this limit,
DTU will redial.
3
ICMP detect interval
1 to 3600 seconds
55
Forced ICMP detect
“OFF” means that ICMP will sleep when transmitting data;
“ON” means that ICMP always work even transmitting data.
OFF