User's Manual

8
3 Quick Start
3.1 View Real-Time Logs
Run the configuration tool DTU Tool and log into the device via serial port 2 of the
DTU, as described in section 5.1.
Select the “Advance mode” in DTU Tool, then Click "Settings>>Other " to configure
the Debug Level and Debug mode as shown below.
Figure 3-1 the configure about debug mode
Log in the configuration tool. Choose “Maintenance > Real-time log”. To display
real-time logs, click “Start reading”. Wait for several seconds, and the logs are
displayed. To stop updating the real-time logs, click “Stop reading”. To delete all
displayed logs, click “Clear Screen”. To export displayed logs, click “Export log”, as
shown in Figure 3-2.