Quick Installation Manual

4.2. Logging in to the Gateway

Connect the PC to the gateway directly by using the network cable, start the web browser,

enter https://192.168.2.1 in the address bar, and press Enter to jump to the web login page.

Enter the user name (default: adm) and password (default: 123456), and click OK or press

Enter to access the web configuration page.

Figure 4-2 Login gateway Web management interface

4.3. Connect IG502 to Internet

Step 1: Insert the SIM card. (Note: Before inserting or removing the SIM card,

unplug the power cable; otherwise, the operation may cause data loss or damage

the IG502.) After inserting the SIM card, connect the 4G LTE antenna to the ANT

interface and power on the IG502.

Step 2: Choose Network > Network Interfaces > Cellular page of IG502 and select

Enable Cellular and click Submit.