User's Manual

User Manual
33
name/password
OpenVPN server, import the CA certificate, public key, and
private key for authentication in "VPN >> Certificate
Management".
Pre-shared key
Enter the pre-shared key created on the OpenVPN server.
Digital
certificate
Import the CA certificate, public key, and private key for
authentication in "VPN >> Certificate Management".
Digital
certificate/user
name/password
Enter the user name and password created on the
OpenVPN server, import the CA certificate, public key, and
private key for authentication in "VPN >> Certificate
Management".
Digital
certificate/TLS
authentication
Enter the pre-shared key created on the OpenVPN server,
import the CA certificate, public key, and private key for
authentication in "VPN >> Certificate Management".
Digital
certificate/TLS
authentication/u
ser
name/password
Enter the pre-shared key, user name and password created
on the OpenVPN server, import the CA certificate, public
key, and private key for authentication in "VPN >>
Certificate Management".
Method for setting OpenVPN client on ER800 when connecting to an
OpenVPN server:
OpenVPN can be configured manually, or by importing config file. In the
following example, the authentication type is a digital certificate.
1. Set the OpenVPN parameters for the gateway as shown in the figure below,
ensuring that the network parameters at both ends of the tunnel are consistent.
Click Apply & Save.