User's Manual

User Manual
31
1. Click "VPN >> L2TP >> L2TP Client >> L2TP Class", enter a name of an L2TP
class, and click Add.
2. Configure the pseudowire class: Enter a name of any pseudowire class. "L2TP
Class" is the same as that on the "L2TP Class" page. Set "Source Interface" to the
interface connecting to the server. Select L2TPV2 for "Protocol" and click Add.
3. Set L2TPV2 tunnel parameters: Enter the server's domain name or IP address
for "L2TP Server". "Pseudowire Class" is the same as that on the "Pseudowire
Class" page. Enter the user name and password created on the server. Set other
parameters as required. Click Apply & Save.