User's Manual

User Manual
10
4.2 Network Access via SIM card
Step 1: Insert the SIM card when device is power off. Connect 2 4G antennas to
the router, and connect PC to router. Then power on.
Note：
When insert or plug out SIM card, please unplug the power cable to prevent
data loss or damage the router.
ER800 supports 4 antennas (2 WLAN antenna and 2 WWAN antennas), please
connect all antennas to obtain high communication quality.
Step 2: Open a browser and access to router’s WEB management page. (refer
to 4.1)
Step 3: Click “Network >> Cellular”, set profile. The device enables the
cellular by default, it will connect to Internet within a few minntes. If the device
cannot connect to Internet, please disable and restart dialup. (If you use a
private network SIM card, you also need to configure APN parameter)