User's Manual

User Manual
5
4 Login and Network Access
4.1 Network Access via Ethernet
Step 1: Connect power and Ethernet cable to ER800, connect WAN port to
public network, and one of LAN to PC.
Step 2: Configure PC to be in the same network segment as the IP address of
the router.
(1) Enable PC to obtain an IP address from DHCP automatically
(recommended).
(2) Configure a fixed IP address in the same network segment as the router for
PC. The IP address should be one of the address in 192.168.2.2~192.168.2.254,
Subnet mask should be 255.255.255.0, and Default gateway should be
192.168.2.1. DNS server should be 8.8.8.8 or the address of ISP’s DNS server.
Obtain an IP address automatically/manually