User's Guide

12
Tap to add a new timer; tap to delete a timer; keep the switch in
the ON position to enable the timer; means the timer is off.
Tap the schedule to edit it. You may modify the time, days of the week,
and adjust the heat and cool temperature ranges. Note that up to 12
timers can be set.
Key Lock
Password setting:
Each time you enable the key lock you will need to enter a new password.
This password will save until Key Lock is disabled.
When the Standby parameter is set to “Never” and the Key Lock is
enabled, the Key Lock will activate once the thermostat has been idle for
30 seconds.
When the Standby time is set to any other time value and the Key Lock is
enabled, the main interface will lock immediately.
When the system is locked, changing the main interface state, System
Mode or Setting will require you to input the Key Lock password.
Also when the system is locked, the ECO and Away modes will be not be
able to be toggled from the standby screen.