Quick Start Guide

COTX-X5 Outdoor Gateway
Beijing COTX Networks Technologies Co., Ltd. www.cotxnetworks.com
Preparing Your Outdoor Gateway
Step 1: First, carefully connect the LoRa® antenna to the “Lora” port of
the gateway , the Wi-Fi antenna to the “WiFi/BLE” port and the LTE
antenna to the “LTE” port.
Step 2: Next find a suitable location for your gateway to be positioned.
Make sure it will provide the best coverage.
Step 3: To integrate Ethernet network, use a network cable and connect
the gateway to the switch or router
Step 4: The default setting is Power over Ethernet (PoE). Connect the
Ethernet port of the gateway to a switch with PoE function (PoE - IEEE
802.3af or IEEE 802.3at). If unavailable, use a PoE injector and power
up.
Power on by PoE Switch