User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

phone connect with Internet correctly.

7.3 Install and using

7.3.1 Installation

You can install the mobile client as install java games in your smart phone, install mobile

client in your smart phone directly (downloaded the program in WAN or LAN) or use the

application supplied by the manufacture of your smart phone to install mobile client.

7.3.2 Connection

After you installed mobile client in your smart phone, you should be sure that your smart

phone connect with Internet correctly. Currently, mobile providers support WAP and

WEB access point, mobile client must use Internet as access point (AP) to access DVR

Server remotely.

7.3.3 Login Interface

After you downloaded and installed the Mobile DVR software, you can run it on your

mobile phone to enter the login interface.

[Addr] Fill the IP address or domain name of the DVR server.

[Port] Fill the port through which connects to DVR Server.

[User]/[Pass] Fill the valid user with its password to visit server from Mobile DVR. And

the server has enabled rights management, login user ID and password from client will

be checked. If the user has no right to visit that camera, the connection will be cut down

automatically.