User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

Chapter 7 Mobile Client

7.1 Recommended Mobile Phone Requirements

1) Before you run Mobile Client, please check if your mobile phone supports JAVA and

comply with following applicable standards:

CLDC version: CLDC-1.0

MIDP version: MIDP-2.0

2) Your mobile telephone should have GPRS or CDMA to transport data.

3) Set Internet as the access point of your phone call.

4) Select “Enable” to allow the PDA to connect With DVR server in the

network setup of

the DVR system.

5) To use PDA connection normally, the DVR board should support dual compression

and user must open sub channel compress in

camera setup. User should select “CIF ” or

“QCIF” but not “same as recording” for remote [Remote Image size].

Note:

GPRS is charged by data flow, so shut down the Mobile DVR application if you do not

need to view cameras.

7.2 Download software

You have following methods to download our mobile client software:

1) Download through wireless technology (in Wireless LAN) such as Blue tooth, infrared.

2) Copy mobile client software to phone directly through data cable.

3) Download mobile client software through OTA (in WAN), it will describe as follow:

Enter “http://IP:PORT/mobiledvr ” in the address bar of the mobile telephone internet

explorer to download the setup package of the Mobile Client.

Note:

IP: the IP address of the PC Based DVR server.

PORT: the Port of the IE client of the DVR server.

When you download mobile client software on WAN, you must be sure that your mobile