User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
59
[Camera] Select a camera to be set from the drop-list and you can copy the
configuration to the other cameras by clicking copy button.
[Alarm Type] Select alarm type: Motion detection, Tempering alarm and Video Loss.
[Level] Select sensibility levels from 0 (the lowest level) to 5 (the highest level) for the
alarm
[Set motion detection areas] Left-click mouse and drag it on the screen to select
motion detect area, you can select the whole area or many areas. Also, you can clear
one or whole area by press the button clear and test the effect by clicking test button.
[Policy] Selecting “Handling current alarm” firstly, handling policies will be available as
follows:
Audible warning—Indicate the alarm with voice.
Upload to DVR server—Update the alarm information to center.
Trigger alarm out—Trigger alarm box to output the alarm.
[Trigger record camera] Set cameras to record triggered by the alarm. You can select
one or more channels. When there is alarm input, the cameras will be triggered to record
(the record type of the channel is Alarm Record), and the monitor will switch to preview
the cameras (warning on monitor is enable).
[Schedule] Set alarm input precaution time. Select date firstly, then set time segment
according to the sequence. The time of each segment should not overlap the others and
no skips are allowed. After the precaution time of a certain day is set, you can copy the
parameter to other dates by select a day and press copy button.
[Copy to] After finishing one channel, if you want to set any other channels’
configuration as the same as this camera, you can select channel number from drop-list,
and press
button.