User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
57
[Sensor NO] Select one sensor to be set.
[Sensor Name] Enter the name description of the sensor.
[Type] Select alarm type (sensor type) from “NO” (Normally Open) or “NC” (Normally
Close)
[Policy] Selecting “Sensor Alarm Handling” firstly, handling policies will be available as
follows:
Audible warning—Indicate the alarm with voice.
Upload to DVR server—Update the alarm information to center.
Trigger alarm out—Trigger alarm box to output the alarm.
[Trigger record camera] Set cameras to record triggered by the alarm. You can select
one or more channels. When there is alarm input, the cameras will be triggered to record
(the record type of the channel is Alarm Record), and the monitor will switch to preview
the cameras (warning on monitor is enable).
[Preset] Set camera that will move to its one preset position when the alarm happened.
[Schedule] Set alarm input precaution time firstly, then set time segment according to
the sequence. The time of each segment should not overlap the others and no skips are
allowed. After the precaution time of a certain day is set, you can copy the parameter to
other dates by select a day and press copy button.