User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
56
In this screen, you can define the PTZ protocol and set the Preset Position as well as the
plan to execute them automatically.
[Camera] Select the camera to be set from the drop- list.
[Baud rate] Set baud rate according to PTZ protocol from the drop- list.
[PTZ Protocol] Select the communication protocol for the PTZ camera from drop-list.
[PTZ Address] Set the address of the decoder, which must be matched with the value of
dipswitch in the PTZ.
[Preset position & schedule setup] Define preset position and set time to call preset
position automatically. System can add and delete plan
time.
[Copy to] After finishing one channel, if you want to set any other channels’
configuration as the same as this camera, you can select channel number from drop-list,
and press
button.
4.5 Sensor setup
Press button to set sensor parameters.