User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
54
foreside server
4.3 Channel setup
Press button to set channel parameters.
This section contains the parameters to designate a name for every camera connected,
to enable or disable show LOGO and OSD, and to set display type of OSD & LOGO as
well as record resolution, record type, record quality and frame rate, etc.
[Camera] Select the camera to be set from the drop- list.
[Camera Name] Enter a name description for easy identification.
[Frame Rate] Select the record rate of camera from drop-list.
[Resolution] Set the resolution at which the video files will be recorded. Choices are
DCIF, CIF, QCIF, 2CIF and 4CIF, the higher resolution, the more disk space.
[Stream Type] Select video and audio or only video record.
[Image] Set the quality of the image to be recorded. Select from worst, worse, normal,
good and best.
[Bit Rate Type] Select bit rate type from Variable Bit Rate (VBR) and Fixed Bit Rate
(FBR) record: