User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

[Video View Mode]Select video output display mode, there are 1split , 2split ,

4split , 9split , 13split and 16 split .

[Video Window][Display Video Camera in window] After selecting video split mode,

there will have corresponding display video window, select one camera or several

cameras to show in the window. For IP cameras, system use hard decoding, total

channels of them are influenced by decoding channels. For different work mode (set in

IP Camera list), the channels you can used is different, the available certain channels

must be the first certain channels.

Note:

One camera is only showed in one window once.

[Video Switch Interval (sec)] Set intervals that each window shows cameras circularly

when there have more than one camera in it.

3.6.2 Display setup

[Display Group] System operator can set a group of cameras to display for fast preview,

including its display mode and cameras. Up to 16 groups can be set.

[Video View Mode] Set the split mode, the split mode is same as main window’s display

split mode. There are1, 4,9,13,16,20,25,28,33,36,40,49 and 64 partition mode.

[Video Window][Display Camera in the window] After selecting video split mode,

there will have corresponding windows, select one camera show in per window. The

cameras include 64 cameras (the biggest of the system limitation), when the total

channels (cameras of local board card and IP Cameras) are less than 64, some

channels do not have image with black window.

Note:

One camera is only showed in one window once, but each camera can display any

window discretionarily. E.g.: The 1

camera has been displayed in window1, and the 2

camera has been displayed in window2. When change the 1

camera to be displayed in

window2, the 2

camera will be exchanged in window 1 automatically.