User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

[Send Notification from Cameras (Screenshot From Alarm Camera)] Operator can

select the cameras, which will trigger to send E-mail when they have alarms. The

cameras you can select are only the cameras of the local board card, IP Cameras are

not included.

[Send Notification from Sensors (Screenshot From Linked Camera)] Operator can

select the sensor, which will trigger to send E-mail when they have alarms.

NOTE:

If send the grab picture as the attachment, you should check alarm of the camera or the

sensor, and set “alarm send to network” to be enabled.

3.6 Digital matrix setup

3.6.1 Matrix setup

[Matrix Group] System operator can set a group of video images to be sent out through

matrix decode card, each group has different display mode. Up to 16 groups you can set.

[Video Out Port] Select the output port of Matrix card that you want to set; the total

number of channels is decided by Matrix Decoder card.

[Video Out Standard] Set Matrix video out standard, you can select from PAL and

NTSC.