User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
44
1. PTZ position will influence PTZ control. E.g.: if you set it as obverse and press left,
then it will turn left. If you set it as inverse and press left, then it will turn right.
2. If there is (H) after the PTZ protocol, it has the high speed of Preset function. If there is
no (H), it only has ordinary functions.
3. The PTZ address will be sent as a message option. Take care that some address
begins from 0. That is to say, when the address number is 1, the real address is 0. So we
must set it according to their relations.
3.4.2 Motion detection relay & remote client alert
[DO Port][DO Port Name] Select a DO port and set its name to identify the various DO
port. It will be shown as a tip when the mouse moves closely or above the DO button in
DVR Server or NVR Client.
[Camera alarm detected In] Selects camera to be set from dropdown list
[Send Alarm to client] Select sending alarm to network clients or not
[Motion Alarm Sound] Press
button to selects a “.wav” sound File for a motion
alarm. If there is a motion alarm, the sound file will be played. Also, you can test it by
pressing
button.
[Video Loss Alarm Sound] Press
button to selects a “.wav” sound File for a video
loss alarm. If there is a video loss alarm, the sound file will be played. Also, you can test
it by pressing
button.
[Trigger DO Output] Selects which DO ports will be triggered by above camera alarms.
3.4.3 Schedule Setup
Setting for cameras of local board cards, IP Cameras are not included.
1) Motion & Video Loss (Red): DVR System responds with Motion Detection and Video