User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

3.4 PTZ & Linkage setup

3.4.1 PTZ protocol setup

[Selected Camera] Select the camera from the drop-down list to be set the parameters.

The cameras just include the cameras of local board card; IP Cameras are not included.

For IP Camera, you should set it remotely in

IP Camera setup.

[PTZ Port] Select PTZ connecting port, when you do not use PTZ port, please choose

“------”.

[PTZ Protocol] Selects the PTZ protocol for the PTZ camera

[PTZ Address] Set the camera ID number of the PTZ camera being controlled.

Note:

The PTZ camera has a dipswitch to set the PTZ address. The PTZ camera ID number

must be matched with the number of this dipswitch.

[PTZ Baud rate] Select PTZ Baud rate for the PTZ camera.

[PTZ Position] Select the installation mode of the PTZ according to its installation mode.

Notes: