User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

3.3 Sensor setup

3.3.1 Sensor setup

[Select Sensor] Select the sensor from the drop-down list in order to set the parameters

for it.

[Sensor] Select this sensor port to use or not.

[Sensor Position] Enter the description for easy identification.

[Activate PTZ Preset] Select linkage of Speed Dome preset number. Speed Dome will

move to this preset number automatically when there is an alarm. (Speed Dome

installation needed).

[Play Alarm sound] Select a sound of wav for a sensor, if there is an alarm, the sound

file will play.

[Link to PTZ] Select camera that is related to this sensor alarm.

3.3.2 Group setup

Sensor group setup is very similar to the group setup of camera recording.

[Selected Group] Select group number.