User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
39
resolution is set as others (except “704*576(12fps)”), if Remote image size is set as
“Same as Rec”, Remote frame rate (fps) and Remote Quality are no effects, the client’s
parameters will be same as server.
6. Variable digital rate table
Image quality Record Environment Occupied Disk Space (/com/hour)
Poorest
low action, indoor about 45Mb
high action, road about 95Mb
Medium
low action, indoor about 70Mb
high action, road about 180Mb
Best
low action, indoor about 160Mb
high action, road about 320Mb
Invariable digital rate can’t improve image quality but it is helpful for calculating disk
space. Variable digital rate recording is recommended.
3.2.2 Group setup
Note:
If you set a camera into several groups, only the last setup is available.
[Selected Group] Select group number.
[Swap File] Set recorded video file size saved in HDD. For easy backup, don’t set too
large file size. Up to 512M can be set, but 30M is recommended.
[Selected Cameras] Select the camera that have the same work mode with group.
Cameras include local board card and IP module
[Pre-Event Record] Select the start time of record when there is an alarm. When DVR
system is in Motion Detect mode or Sensor Detect mode, it can record video before the
alarm is trigged.
[Post Record Time] Select the end time of record when there is an alarm. When the
system is in Motion Detect mode or Sensor Detect mode, it can record video after the
alarm end.
[Record Audio] Selects whether program record audio data or not, this setting is not
available for IP Cameras, for stream type of IP Camera, you should set it remotely in
IP
Camera setup.
Recording Schedule Setup: (setting for cameras of local board cards and IP Cameras.)