User manual

IDRS-6000S-HE Series PC Based DVRs user Manual

For D1: Maxbps = (Maxbps/3)*8 Note: Maxbps is the CIF’s value with the

same configuration (I P B)

[Alarm Adjust fps] Select enable or disable, If select “enable”, when alarm occurred, the

camera will record with real-time frame rate(25fps or 30fps) ,even though [Frame

Rate(fps)] has been set other values(eg:5fps).

[Remote Quality] Set the image quality of the clients to be recorded from Poorest, Poor,

Medium, Very good and Best.

Click this button, users can make advanced setup for video quality of client end,

also can setup I B P frame and adjust maximum bit rate according to the network

bandwidth.

[Image Size] Set the resolution for local record. There is an item “704*576(12fps)”, each

channel can be set “704*576”, but not real time, system will select frame rate

automatically around to 12-15fps. To get best effect, you should set the resolution of local

record according to your CPU configuration. There is a referenced configuration sample

as below:

Computer configuration:

CPU: Intel Pentium 4 2.4GHz

Motherboard: ECS 848P-A

Graphic Card: ATI 9550 128MB,

Memory: 512MB

HDD: 120G (IDE)

Recommended resolution configuration for different channels:

DVR Board Channels Recommended Resolution Remark

64 CIF

Continuous recording is

not recommended

48 CIF

DCIF

CIF

DCIF

CIF

DCIF

CIF

Less or Equal to16

4CIF

DCIF

CIF

[OSD Date] Select whether display the OSD date on the screen or not. When you select

“Not”, the date will not display on the screen of corresponding channel.