User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
24
the user has no right to visit that camera, the connection will be cut down automatically.
[If use DNS to get IP] Select whether use DNS to get IP or not, if the server end is the
dynamic IP address, users need use DNS to get the IP of the server.
[DNS Server IP] Set IP address of DNS server host.
[DNS Server Port] The port of DNS server host, which is provide to connect DNS
software.
When you finished adding IP Camera to DVR system, it will show the status of that
camera, including Sever name, IP Address, connect port, sequence number for IP
Camera, connect status and register information.
Note:
1. Currently our DVR server can maximums add 16 channels IP cameras. For each
device, system allows to connect maximum 4 cameras.
2. After you add IP cameras to DVR system, they will be collocated sequence numbers
after local board cards. The sequence numbers of the IP camera change dynamically
according to the total numbers of local board cards and the sequences of the IP cameras
to be added. For example, if there have 32 channels local board card, then you adds 2 IP
cameras, they will be collocated 33 and 34 as their sequence number. Then if you add
another board card (4 channels), the sequence number of them will change to 37and 38
dynamically.
(2) Modify IP camera
Press button to modify IP camera’s information, its interface is same as
Add IP Camera.
(3) Delete IP camera device
Press button to delete connected server. When system is in processing to
add IP camera device (“connecting…”indicated in connect status column), user can not
delete that IP camera device.
2.2.5 Network panel
This panel displays the network configuration of DVR system.