User manual

IDRS-6000S-HE Series PC Based DVRs user Manual
12
2.2 Main Interface
2.2.1 Show tips
1. When the mouse moves closely or stops above a button, a text tip will be shown to
interpret the function of it immediately.
2. Zoom in/out video image: Left-Double-Click a camera window to zoom in/out video
image (or
press F11 on the keyboard).
3. System will detect cards and read the total number automatically, and the
corresponding number buttons will be displayed dynamically.
4. Recording status:
a. This icon means the system is recording normally.
b. This icon means the system is recording manually.
c. This icon means the system is recording in motion detection.
d. This icon means the system is recording in sensor detection.
2.2.2 Screen menu
Press TAB key or Page UP (select next camera window) and Page Down (select
previous camera window) key on keyboard to select one live camera window.
2.2.2.1 Full screen
Single-Right- Click image area, it will popup a menu, then select “full screen” to change
display mode to full screen (or
press F12 on the keyboard). When you want to resume
origin mode, you should single-right- click image area and select “Restore display”.
2.2.2.2 Instant playback
Single-Right-Click desired camera window and select “Instant playback” (except IP
Camera, it can just play back instantly in the window that is not used). After that, choose
a time from the submenu, and then system will play back video data of current camera in
current window according to your selection (E.g.: you select 1min, system will play back
previous 1 minute video data of current camera in current window). Also, you can play
back video data of one current live camera in a window that is not used by any cameras
(always black background with no “Video Loss” information, IP Camera can only play
back instantly in those windows): Select a window, and then Single-Right-Click it to
select “Instant playback”. Finally, choose a time and the camera you want to playback,